Finishing Operator

JOB SUMMARY:
The finishing operator shall review castings for visual surface imperfections including
positive/excess metal, negative indications, pits/inclusions, parting lines and evaluate their sizes
against provided limiting criteria. These limits are shown as sizes in standard units such as 0.030”
in diameter and/or 0.005” high for examples. If parts exhibit indications greater than the limits, the
finishing operator shall blend the indications using small hand tools such as “Dotco/Dremel” type
rotating air tools. The tools are equipped with burrs/stones/grinding discs to remove/blend
indications without removal of excess amounts of base metal.

The operator will sandblast castings post blending and finishing and re-inspect suspect areas for
conformance. The operator will be evaluated periodically for productivity (good parts
processed/hour) and quality, number of rework returns.

JOB REQUIREMENTS:
• Visually inspect casting for surface imperfections
• Evaluate sizes of indications to a known standard limit
• Hand Finish casting surface to bring indications down to acceptable size using air tools
• Sandblast casting to a sheer finish
• Re-evaluate suspect indication areas for conformance
• Work with operators before and after hand finish process to improve quality and productivity
• Other responsibilities as trained and assigned

JOB QUALIFICATIONS:
• Read, Write and Speak English Fluently
• Must be able to understand basic inch and size measurements such as length, height, and
diameters notated in decimal fractions of an inch
• Must have a minimum of 2 years of mfg. experience in a related field of metal working/hand
finishing/product inspection or in a position that required the employee to work effectively and
intricately with their hands
• Must pass a drug screening check prior to beginning work

PHYSICAL REQUIREMENTS:
• Able to sit at a desk for extended periods of time
• Must be able to sit or stand for extended periods of time while working castings
• Must be able to lift 50 pounds

Hours are: 2nd shift 2:00pm – 10:30 pm

Background check clean

Please send resume!

Ameritemps AZ LLC
1309 W Guadalupe Rd
Suite#3
Mesa, Az 85142