SAND SPRINGS INDUSTRIAL FABRICATION SHOP OPENINGS: CALL 918-742-5300

Position: MATERIAL HANDLER Temp position
Reports to: Warehouse Manager
JOB DESCRIPTION
__________________________________________________________________
Summary/Objective
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Loads, unloads, and move materials within or near plant, yard, or work site, performing any combination of following duties: Reads work order or follows oral instructions to ascertain materials or containers to be moved.
• Opens containers, using steel cutters, crowbar, claw hammer, or other hand tools.
• Loads and unloads materials onto or from trucks, trays, racks, and shelves by forklift.
• Verifies inbound/outbound raw materials against a purchase order and/or packing list and/or bill of material.
• Mark materials with one or more of the following: purchase order number, lot number, heat number, and job number.
• Maintain material yard and storage areas for ease of identification, organization, and access of materials.
• Loads materials into vehicles and installs strapping, bracing, or padding to prevent shifting or damage in transit, using hand tools.
• Conveys materials to or from storage or work sites to designated areas, using forklift
• Operate forklift to assist in loading or moving materials and products.
• Must be able to read a tape measure. Use simple math, general knowledge of steel shapes.
This has determined this position involves safety-sensitive job duties and will be considered a safety-sensitive position for purpose of the Oklahoma Medical Marijuana and Patient Protection Act (“The Unity Bill.”) effective August 29th, 2019.
Competencies
• Communication Skills
• Results Oriented
• Teamwork
Supervisor Responsibility
This position has no supervisory responsibilities.
Work Environment
Non-temperature-controlled environment with loud noises, dust, dirt, and metal particles that are usually associated with metal fabrication shops. All employees are required to wear personal protective equipment to include noise/hearing protection, safety glasses with side shields, and OSHA compliant safety boots/shoes within the manufacturing facility.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee is regularly required to sit. The employee frequently is required to walk; use hands to finger, handle or feel; reach with hands and arms; and talk or hear. The employee is occasionally required to stand. The employee must frequently lift or move objects up to 10 pounds and occasionally lift or move objects up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision and ability to adjust focus.
Position Type/Expected Hours of Work
This is a full-time position. Days and hours of work are Monday through Thursday, 6:00 a.m. to
4:30 p.m. Occasional evening and weekend work may be required as job duties demand.
Travel
No travel is required for this position.
Required Education and Experience
• High school diploma or equivalent (GED)
• 6 months to 1 year of relevant experience and/or training
• Ability to operate a forklift
• Ability to work independently on assigned tasks


Position : ASSEMBLY TECHNICIAN III
Reports to: Assembly Tech Lead
JOB DESCRIPTION
__________________________________________________________________
Summary/Objective
The Assembly Technician III is responsible for making sure all parts are assembled correctly before passing on to final test.
Essential Functions
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Ability to read and interpret piping and instrumentation diagram (P&ID) drawings and blueprints
• Verify parts to piping and instrumentation diagram (P&ID) drawings, BOM
• Instrumentation/tubing fitting
• Cut and thread piping
• Measure, bend and install 3/8” ss tubing
• Must be able to read a tape measure to within 1/16 of an inch
• Completes tasks as directed by manufacturing schedules with minimal supervision
• Knowledge of pipe fittings, valves, and switches
• Ability to operate a forklift and crane
• Perform other duties as assigned
This position involves safety-sensitive job duties and will be considered a safety-sensitive position for purpose of the Oklahoma Medical Marijuana and Patient Protection Act (“The Unity Bill.”) effective August 29th, 2019.
Competencies
• Technical Capacity
• Time Management
• Thoroughness
Supervisor Responsibility
This position has no supervisory responsibilities.
Work Environment
Non-temperature controlled environment with loud noises, dust, dirt, and metal particles that are usually associated with metal fabrication shops. All employees are required to wear personal protective equipment (PPE) to include noise/hearing protection, safety glasses with side shields, and OSHA compliant safety boots/shoes within the manufacturing facility.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee in this position is regularly required to stand for long periods of time. This position requires walking, the ability to reach, ascend/descend ladders, bend, kneel, and stoop. The employee occasionally will lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Position Type/Expected Hours of Work
This is a full-time position. Days and hours of work are Monday through Thursday, 6:00 a.m. to 4:30 p.m. Occasional evening and weekend work may be required as job duties demand.
Travel
No travel is required for this position.
Education and Experience
• High school diploma or equivalent (GED)
• 6 months to 1 year of instrumentation / tube fitting
• Tube-bending experience required.
• Possession of strong organizational skills
• Excellent written and verbal communication skills
• Ability to work independently on assigned tasks


Position: FITTER WELDER
Reports to: Fabrication Foreman or Fab Lead
JOB DESCRIPTION
__________________________________________________________________
Summary/Objective
The Fitter Welder is responsible for fitting parts for units.
Essential Functions
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Clamps, holds, tack-welds, grinds, and bolts components to position for welding.
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Measure dimensions of completed products or workpieces to verify conformance to specifications.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations.
• Maintain and complete all required records and production documentation.
• Layout, fits nozzles supports and couplings per blueprint into shell.
• Remove rough spots from workpieces, using portable grinders, hand files, or scrapers.
• Maintains a safe work environment and reports defective tools and equipment.
• Ability to operate a forklift and crane.
• Complies with all safety rules and regulations.
• Perform other duties as assigned.
This position involves safety-sensitive job duties and will be considered a safety-sensitive position for purpose of the Oklahoma Medical Marijuana and Patient Protection Act (“The Unity Bill.”) effective August 29th, 2019.
Competencies
• Technical Capacity
• Mathematical
• Thoroughness
Supervisor Responsibility
This position has no supervisory responsibilities.
Work Environment
Non-temperature controlled environment with loud noises, dust, dirt, and metal particles that are usually associated with metal fabrication shops. All employees are required to wear personal protective equipment to include noise/hearing protection, safety glasses with side shields, safety harness, full face grinding shield, welding hood and OSHA compliant safety boots/shoes within the manufacturing facility.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee in this position is regularly required to stand for long periods of time. This position requires walking, the ability to reach, ascend/descend ladders, bend, kneel, and stoop. The employee occasionally will lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Position Type/Expected Hours of Work
This is a full-time position. Days and hours of work are Monday through Thursday, 6:00 a.m. to
4:30 p.m. Additional work hours and weekends may be required as job duties demand.
Travel
No travel is required for this position.
Required Education and Experience
• Ability to pass 3G Stainless weld test. MIG all the way out. 3/8 thick.
• 2 plus years of relevant experience welding stainless steel.
• Read and interpret blueprints and have strong mathematic skills.
• Ability to use and read level, tapes, protractors, and various tools.
• Possession of strong organizational skills.
• Excellent written and verbal communication skills.
• Ability to work independently on assigned tasks.
• High school diploma or equivalent (GED).
• 2-year technical degree or vocational certificate in welding preferred.


Position: CODE FITTER WELDER
Reports to: Fabrication Foreman
JOB DESCRIPTION
__________________________________________________________________
Summary/Objective
The Code Fitter Welder is responsible for fitting and welding ASME code 100% x-ray coils.
Essential Functions
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Clamps, holds, tack-welds, grinds, and bolts components to position for welding.
• Examine workpieces for defects and measure workpieces with straightedges or templates to ensure conformance with specifications.
• Measure dimensions of completed products or workpieces to verify conformance to specifications.
• Develop templates and models for welding projects, using mathematical calculations based on blueprint information.
• Analyzes engineering drawings and specifications to plan layout, assembly, and welding operations.
• Maintain and complete all required records and production documentation.
• Layout fits nozzles supports and couplings per blueprint into coil.
• Remove rough spots from workpieces using portable grinders, hand files, or scrapers.
• Maintains a safe work environment and reports defective tools and equipment.
• Ability to operate a forklift and crane.
• Complies with all safety rules and regulations.
• Perform other duties as assigned.
This position involves safety-sensitive job duties and will be considered a safety-sensitive position for purpose of the Oklahoma Medical Marijuana and Patient Protection Act (“The Unity Bill.”) effective August 29th, 2019.
Competencies
• Technical Capacity.
• Mathematical.
• Thoroughness.
Supervisor Responsibility
This position has no supervisory responsibilities.
Work Environment
Non-temperature-controlled environment with loud noises, dust, dirt, and metal particles that are usually associated with metal fabrication shops. All employees are required to wear personal protective equipment to include noise/hearing protection, safety glasses with side shields, safety harness, full face grinding shield, welding hood and OSHA compliant safety boots/shoes within the manufacturing facility.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee in this position is regularly required to stand for long periods of time. This position requires walking, the ability to reach, ascend/descend ladders, bend, kneel, and stoop. The employee occasionally will lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Position Type/Expected Hours of Work
This is a full-time position. Days and hours of work are Monday through Thursday, 6:00 a.m. to
4:30 p.m. Additional work hours and weekends may be required as job duties demand.
Travel
No travel is required for this position.
Education and Experience
• Ability to pass ASME Code Section 8 Welding test. 2" schedule 160 carbon, 6G pipe test. GTAW (TIG) all the way out. FCAW (Fluxcore)
• High school diploma or equivalent (GED)
• 2-year technical degree or vocational certificate in welding preferred
• 4 to 5 years of relevant experience and/or training
• Read and interpret blueprints and have strong mathematic skills
• Ability to use and read level, tapes, protractors, and various tools
• Possession of strong organizational skills
• Excellent written and verbal communication skills
Ability to work independently on assigned


Position: FIELD SERVICE TECHNICIAN
Reports to: Service Manager
JOB DESCRIPTION
__________________________________________________________________
Summary/Objective
The Service Technician is responsible for answering service calls from customers needing first-line technical support.
Essential Functions
Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
• Conducts product installations, preventive maintenance, repair, modifications/updates, product trials and basic product operation.
• Pretest units before shipment to ensure optimal operating performance of equipment.
• Perform repairs and startups on water bath heaters and industrial heaters.
• Provides feedback on product performance to engineers and managers.
• Provides technical expertise and guidance to customers.
• Responds to customer inquiries and ensures excellent customer service.
• Schedule service jobs and coordinate with customers.
• Trouble-shoot over the phone with field operators.
• Actively support the company’s commitment to safety and its values.
This position involves safety-sensitive job duties and will be considered a safety-sensitive position for purpose of the Oklahoma Medical Marijuana and Patient Protection Act (“The Unity Bill.”) effective August 29th, 2019.
Competencies
• Technical Capacity.
• Problem Solving/Analysis.
• Communication Proficiency.
Supervisor Responsibility
This position has no supervisory responsibilities.
Work Environment
Non-temperature-controlled environment with loud noises, dust, dirt, and metal particles that are usually associated with metal fabrication shops. All employees are required to wear personal protective equipment to include noise/hearing protection, safety glasses with side shields, and OSHA compliant safety boots/shoes within the manufacturing facility.
Physical Demands
The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job.
While performing the duties of this job, the employee in this position is regularly required to stand for long periods of time. This position requires walking, the ability to reach, ascend/descend ladders, bend, kneel, and stoop. The employee occasionally will lift and/or move up to 50 pounds. Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
Occasionally visit customer sites to evaluate projects, which may require moving above, below, over, and around stationary objects. Some sites may have space limitations which may make movement while installing, adjusting, or repairing equipment and parts difficult. These customer sites may potentially be hot, cold, or loud.
Position Type/Expected Hours of Work
This position follows a standard work schedule of Monday through Friday, 8:00 am to 5:00 pm. However, due to the frequent travel requirements of this role, the employee will be expected to work additional hours outside of the standard schedule, including evenings, weekends and holidays as necessary to meet business and customer needs. Flexibility in scheduling is required.
Travel
Frequent travel is required for this position.
Education and Experience
• 2-year technical degree or vocational certificate in related field preferred.
• High school diploma or equivalent (GED).
• Minimum 5 years demonstrated experience.
• Burner knowledge preferred.
• Knowledge of PLC programming and electrical knowledge is preferred.
• Excellent written and verbal communication skills.
• Ability to work independently on assigned tasks.

APPLY IN PERSON AT:
LLOYD RICHARDS PERSONNEL
4619 S. HARVARD AVE. SUITE 105
TULSA OK 74135
BRING DRIVERS LICENSE AND SOCIAL SECURITY CARD TO APPLY 9:00AM-3:30PM CALL 918-742-5300